MegaPi Pro Encoder/DC Motor Driver

Overview

MegaPi Pro Encoder/DC Motor Driver can drive two DC motors or one encoder motor. It adopts the 2 × 8 pin connection mode and thus can be easily mounted on MegaPi Pro.

Technical specifications

  • Motor driver: MP80495
  • Number of motor channels: 2
  • Minimum operating voltage: 6V
  • Maximum operating voltage: 12V
  • Logical voltage: 5V
  • Rated operating current of each channel: 3A
  • Peak operating current: 5.5A
  • Dimensions: 30 mm x 15 mm (width × height)

Features

  • Supports motors with the operating voltage range of 6V to 12V
  • Provides a maximum operating current of 3A when the power supply is 12V
  • Equipped with overvoltage, overcurrent, and overtemperature protection, which ensures safe application
  • Able to drive an encoder drive (using the white interface) or two DC drivers (using the green interface)
  • Equipped with a colored socket and plug that prevent plugging mistakes
  • Provides the transient voltage suppressor (TVS) protection on the encoder motor dirver
  • Small in volume and thus easy to replace

Connection

results matching ""

    No results matching ""